Model Number: M5070A

Description: This battery pack is designed for either the OnSite AED or FRx AED. This is a disposable, lithium manganese dioxide battery, with a full 4-year life.

Model Number: M5071A

Description: The Philips HeartStart OnSite HeartStart Adult SMART Pads are appropriate for cardiac arrest victims weighing 55 pounds (25 kg) or more.

Model Number: M5072A

Description: Children under 8 years of age or weighing less than 55 pounds (25 kg), including infants, should be treated using HeartStart Infant/Child SMART Pads. These pads instruct the AED to reduce the energy of its shock from 150 to 50 Joules (J), a more appropriate dosage. The Infant/Child Pads cartridge is marked with an indication of patient weight and with a teddy bear icon for easy identification.

Model Number: M5085A

Description: For training many responders simultaneously, the Philips HeartStart OnSite Trainer is a flexible and economical solution. With voice instructions matching those of the OnSite AED and eight pre-configured scenarios, the trainer simulates how the AED would operate during real-life situations a responder might encounter. The HeartStart OnSite Trainer comes with a nylon carrying case, one reusable Training Cartridge (w/ re-usable pads) and one external manikin adapter.

Model Number: M5073A

Description: When installed in the Philips HeartStart OnSite, these special purpose pads suspend the AED's ability to deliver a shock and activate its training mode, enabling the user to run any of eight emergency scenarios. Adult Pads Placement Guide included free-of-charge.

Model Number: M5093A

Description: Replacement training electrode pads (Adult). For use with the Philips OnSite training unit.

Model Number: M5074A

Description: When installed in the HeartStart OnSite, these special purpose pads suspend the defibrillator's ability to deliver a shock and activate its training mode, enabling the user to run any of eight emergency scenarios. Infant/Child Pads Placement Guide included free-of-charge.

Model Number: M5094A

Description: Replacement training electrode pads (Infant/Child). For use with the Philips OnSite training unit.

Model Number: TL1

Description: Cabinet Details: Accommodates EVERY major AED on the market. Height 15", Width 14", Depth 6.75", Weight 10 lbs. Shipped fully assembled in protective foam packaging. Keyless Alarm can be controlled from outside or inside the cabinet. PLEASE NOTE: This AED Cabinet is better-built (with a higher grade of metal) than other cheaper models you may find. This AED Cabinet is manufacturered by HeartStation - the leading AED cabinet manufacturer.

Model Number: RC5300

Description: Cabinet Details: Accommodates EVERY major AED on the market. Height 17", Width 16", Depth 6.25", Weight 18 lbs. Shipped fully assembled in protective foam packaging. Keyless Alarm can be controlled from outside or inside the cabinet. For added visibility and security, this cabinet includes a flashing strobe light. PLEASE NOTE: This AED Cabinet is better-built (with a higher grade of metal) than other cheaper models you may find. This AED Cabinet is manufacturered by HeartStation - the leading AED cabinet manufacturer.

Model Number: PFE7024D

Description: Equipped with an audible alarm and flashing lights (powered by two 9-volt alkaline batteries not included), this AED Cabinet may be mounted onto almost any wall surface. Dimensions: Dimensions: 16" x 22.5" x 6". Weight: 13.608kg

Model Number: PFE7023D

Description: Equipped with an audible alarm and flashing lights (powered by two 9-volt alkaline batteries not included), this AED Cabinet may be recessed into almost any wall surface. Dimensions: Inside compartment: 14" x 22.5" x 6", footprint on wall: 16.5" x 24.5" x 2.5" (meets ADA guidelines). Weight: 13.608kg

Model Number: M5076A

Description: The Philips HeartStart OnSite Slim Carry Case holds the OnSite Defibrillator and a pair of paramedic scissors. Dimensions:9.5" (24 cm) w X 8.5" (21 cm) h X 3.5" (9 cm) d

Model Number: M5075A

Description: Larger than the Slim-Fit Case, the Philips OnSite Standard Carry Case is equipped with a pair of paramedic scissors and can accommodate one spare pads cartridge and a spare battery pack. Dimensions:9.5" (24 cm) w X 8.5" (21 cm) h X 4.8" (12 cm) d

Model Number: YC

Description: This Pelican-brand carrying case holds the Philips AED's - with room for accessories. Both durable and waterproof, this hard-shell case is designed for extra rugged use, particularly if the AED is in a changing, mobile setting, or may be used in an outdoor environment.

Model Number: 252-115

Description: The CPR/AED Response Kit contains supplies typically needed for patient care and personal protection. Response Kit includes: > Zippered Carry Pouch > CPR Rescue Mask > Non-Latex Gloves (2 Pairs) > Pair Scissors > Medical Prep Razor > Absorbent Towellette

Model Number: 68-PCHAT

Description: The Philips Fast Response Kit contains tools and supplies typically needed for patient care and personal protection. These items are housed in a zippered pouch which attaches securely to the handle of either carry case. The kit contains: 2 pairs of hypoallergenic nitrile gloves Laerdal pocket breathing mask Paramedic scissors Gallant chest hair razor Large extra-absorbent paper towel

Model Number: AEDSign

Description: The highest quality sign available. This two-dimensional wall sign provides great visability for your AED from any direction. While most AED Signs are made from less-durable plastic or cardboard, this metal sign is designed to be highly durable and long-lasting.

Model Number: AED-Bracket

Description: This sturdy, wall-mount bracket is an affordable storage solution and is designed to fit every AED on the market. PLEASE NOTE: Rather than the Wall Bracket, we strongly recommend you store your AED in a more safe and secure AED Storage Cabinet.

Model Number: Decal-5

Description: Designed to let others know an AED is onsite, the decal may be adhered to most any wall or window surface. Made with laminated weatherproof vinyl, the decal's dimensions are 5.5" x 8.5". This order includes 5 decals.

Model Number: Decal-25

Description: Designed to let others know an AED is onsite, the decal may be adhered to most any wall or window surface. Made with laminated weatherproof vinyl, the decal's dimensions are 5.5" x 8.5". This order includes 25 decals.

Model Number: Insp-Tag-5

Description: These AED Monthly Inspection Tags are designed to record the AED's serial number and expiration dates of pads and batteries. The back has space to record the date and initials for when & who inspected the AED. Mylar reinforced, the tag's dimensions are 3" x 6.25". This order includes 5 tags (front/back).

Model Number: Insp-Tag-25

Description: These AED Monthly Inspection Tags are designed to record the AED's serial number and expiration dates of pads and batteries. The back has space to record the date and initials for when & who inspected the AED. Mylar reinforced, the tag's dimensions are 3" x 6.25". This order includes 25 tags (front/back).